Nikon | Imaging Products | Lens Compatibility

Lens/accessory	Camera setting
	Focus			Mode		Metering
	AF	M (with electronic rangefinder)	M	P, S	A, M
	AF	M (with electronic rangefinder)	M	P, S	A, M	3D	Color
Type G, E or D AF NIKKOR² AF-S, AF-I NIKKOR							-	³
PC-E NIKKOR series	-	⁵		⁵	⁵	⁵	-	^3,5
PC Micro 85mm f/2.8D⁴	-	⁵		-	⁶		-	^3,5
AF-S/AF-I teleconverter⁷							-	³
Other AF NIKKOR (except lenses for F3AF)	⁸	⁸				-		³
AI-P NIKKOR	-	⁹				-		³

1IX-NIKKOR lenses can not be used.
2Vibration Reduction (VR) supported with VR lenses.
3Spot metering meters selected focus point.
4The camera's exposure metering and flash control systems do not work properly when shifting and/or tilting the lens, or when an aperture other than the maximum aperture is used.
5Can not be used with shifting or tilting.
6Manual shooting mode only.
7Can be used with AF-S and AF-I lenses only. For information on the focus points available for autofocus and electronic rangefinding.
8When focusing at minimum focus distance with AF 80-200mm f/2.8, AF 35-70mm f/2.8, AF 28-85mm f/3.5-4.5 (New), or AF 28-85mm f/3.5-4.5 lens at maximum zoom, in-focus indicator may be displayed when image on matte screen in viewfinder is not in focus. Adjust focus manually until image in viewfinder is in focus.
9With maximum aperture of f/5.6 or faster.

Lens/accessory	Camera setting
	Focus			Mode		Metering
	AF	M (with electronic rangefinder)	M	P, S	A, M
	AF	M (with electronic rangefinder)	M	P, S	A, M	3D	Color
AI-, AI-modified, NIKKOR or Nikon Series E lenses⁴	-	²		-	⁵	-	⁶	⁷
Medical-NIKKOR 120mm f/4	-			-	⁸	-	-	-
Reflex-NIKKOR	-	-		-	⁵	-	-	⁷
PC-NIKKOR	-	¹		-	⁹	-	-
AI-type Teleconverter¹⁰	-	¹¹		-	⁵	-	⁶	⁷
PB-6 Bellows Focusing Attachment¹²	-	¹¹		-	¹³	-	-
Auto extension rings (PK-series 11A, 12, or 13; PN-11)	-	¹¹		-	⁵	-	-

1Can not be used with shifting or tilting.
2With maximum aperture of f/5.6 or faster.
3Some lenses can not be used.
4Range of rotation for AI 80-200mm f/2.8 ED tripod mount is limited by camera body. Filters can not be exchanged while AI 200-400mm f/4 ED is mounted on camera.
5If maximum aperture is specified using Non-CPU lens data, aperture value will be displayed in viewfinder and control panel.
6Can be used only if lens focal length and maximum aperture are specified using Non-CPU lens data. Use spot or center-weighted metering if desired results are not achieved.
7For improved precision, specify lens focal length and maximum aperture using Non-CPU lens data.
8Can be used in manual mode M at shutter speeds slower than flash sync speed by one step or more.
9Exposure determined by presetting lens aperture. In mode A, preset aperture using lens aperture ring before performing AE lock and shifting lens. In mode M, preset aperture using lens aperture ring and determine exposure before shifting lens.
10Exposure compensation required when used with AI 28-85mm f/3.5-4.5, AI 35-105mm f/3.5-4.5, AI 35-135mm f/3.5-4.5, or AF-S 80-200mm f/2.8D.
11With maximum effective aperture of f/5.6 or faster.
12Requires PK-12 or PK-13 Auto Extension Ring. PB-6D may be required depending on camera orientation.
13Use preset aperture. In mode A, set aperture using focusing attachment before determining exposure and taking photograph.

PF-4 Reprocopy Outfit requires PA-4 Camera Holder.
Noise in the form of lines may appear during autofocus at high ISO sensitivities; use manual focus or focus lock.