Key Features

The FT1 mount adapter allows NIKKOR F mount lenses to be used with Nikon 1 cameras equipped with a Nikon 1 mount. The angle of view of an F mount lens mounted on the FT1 is equivalent to that of a 35mm format lens with a focal length about 2.7 x longer.
The FT1 can be used with more than 80 lenses, representing almost all the NIKKOR lenses currently on the market(*1).
It almost goes without saying that it also supports autoexposure/autofocus(*2) and vibration reduction(*3). Electronic rangefinding is available in manual focus mode.You can also explore the new forms of expression offered by the Nikon 1's unique Motion Snapshot mode(*4).

  • *1DX-format F-mount NIKKOR lenses can also be used with the FT1 mount adapter. IX-NIKKOR lenses, AF lenses for the F3AF, non-AI lenses, teleconverters, and auto extension rings cannot be used.
  • *2Autofocus is available only with AF-S, AF-P lenses; other lenses support manual focus only. Set the camera focus mode to AF-S (the camera will not focus in other autofocus modes). The only AF-area mode available is Single-point AF and the camera focuses on the subject in the center focus point only.
  • *3Available with VR lenses. Vibration reduction is always ON when shooting with a VR lens that has no Vibration reduction ON/OFF switch.
  • *4Motion Snapshots can be recorded only when an AF-S or AF-P lens is attached and AF-S (Single AF) is selected for focus mode and then only when the camera is in focus. Available only when autofocus is used with AF-S lenses.


Mount adapter
Supported cameras
Nikon 1 interchangeable lens format digital cameras (Nikon 1 V1 supported from firmware version A 1.10/B 1.10, Nikon 1 J1 from firmware version A 1.10/B 1.10)
Approx. 61.5 mm diameter (excluding projections) x 42.5 mm
Approx. 150 g/5.3 oz
Supplied Accessories
  • Body Cap BF-1B
  • Rear Lens Cap LF-N1000
Compatible Accessories
Lens Soft Case CL-N101