D500

Tips and Tricks

Radio AWL 2: Establishing a Wireless Connection

Please accept targeting cookies to view this video.

Here’s what you’ll need to do to ready the camera and flash unit for radio-controlled Advanced Wireless Lighting, otherwise known as “radio AWL”.

Step 1: Ready the Equipment

You’ll need: 
- A D500 or other camera that supports radio AWL 
- An SB‑5000 flash unit 
- A WR‑R10 and WR‑A10

Step 2: Connect the Wireless Controller

Attaching the WR‑A10 and WR‑R10

Connect the WR-A10 WR adapter and WR‑R10 wireless remote controller to the camera.


Step 3: Adjust Settings for Connection to the Camera

Adjust settings as follows:

Wireless flash options: Radio AWL
Channel selection

- Select a wireless flash control mode: Select Radio AWL for Flash control > Wireless flash options
- Choose a channel: Set the WR‑R10 to the desired channel

Link mode: PIN
Entering the PIN

- Choose a link mode: Select PIN and enter the camera PIN


Step 4: Adjust Flash Unit Settings

Adjust flash unit settings as follows:

Power switch: Select REMOTE
Remote mode: Radio control remote

- Select a wireless flash control mode: Rotate the power switch to REMOTE.
- Select a remote mode: Choose “radio control remote” mode

Channel selection

- Choose a channel: Choose the channel selected with the WR‑R10

Link mode selection
Entering the PIN

- Choose a link mode: Select PIN and enter the camera PIN


Step 5: Choose a Group


Step 6: Check Flash Status


Step 7: Test-Fire the Flash

Group selection
Test-firing the flash
Functions Used for Radio AWL 2: Establishing a Wireless Connection
View detailed information on the settings and procedures used.

More D500 Tips and Tricks