SB-300
Key Features
Bouncing the light for beautiful indoor images
Pictures can appear very different and achieve various expressions depending on how you manipulate the light. But lighting a shot is not at all difficult with the SB-300 Speedlight. Its flash head can be set up to 120 degrees upward allowing you to bounce light off ceiling or wall to endow a softer, more natural look to your subject. You can easily control the lighting to capture a beautiful indoor portrait creatively.
Compact and lightweight design for great portability
With its compact and lightweight design, comfortable portability is ensured even when attached to a camera. The SB-300 is certain to expand your enjoyment of shooting pictures in a variety of scenes.
Easy operation even for novices
Attach the SB-300 to a camera supporting Nikon Creative Lighting System (CLS) or a COOLPIX model supporting i-TTL flash control, and switch the power on. This is all you have to do to enjoy flash photography. Thanks to Nikon's highly accurate i-TTL flash, the amount of light output is automatically and appropriately controlled, achieving high-quality flash shots reliably.
- *Advanced Wireless Lighting is not supported.
Compatible with readily available AAA-size batteries
The SB-300 uses two AAA-size alkaline or NiMH batteries which are readily available anywhere, so you'll never run out of power.
Specifications
Swipe horizontally to view full table.
Electronic construction |
Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry |
||
---|---|---|---|
Guide number (20°C/68°F) |
18/59 (ISO 100, m/ft) |
||
Angle of coverage |
Covers angle of view of 27 mm lens (FX format) or 18 mm lens (DX format) |
||
Effective flash range (i-TTL) |
0.6 m to 20 m (2 ft to 66 ft); varies with ISO sensitivity, bounce angle, and aperture |
||
Options available using camera controls |
|
||
Bounce angle |
Flash rotates vertically up to 120° with stops where the flash is pointing directly ahead and at 60°, 75°, 90°, and 120° |
||
Device on/off |
Power switch used to turn SB-300 on and off |
||
Power source |
Two AAA alkaline or NiMH batteries |
||
Flash-ready light |
|
||
Flash duration |
Lights for about 1/1650 s when fired at full power |
||
Batter endurance and flash recycling time*1 |
Battery type |
Minimum recycling time*2 |
Endurance*3/recycling time*2 |
Alkaline |
Approx. 4.0 s |
70 or more uses/4.0-30 s |
|
NiMH |
Approx. 3.5 s |
110 or more uses/3.5-30 s |
|
Mounting foot lock lever |
Locking pin prevents accidental detachment |
||
Other options |
Thermal cut-out, firmware update*4 |
||
Dimensions (W x H x D) |
Approx. 57.4 x 65.4 x 62.3 mm (2.3 x 2.6 x 2.5 in.) |
||
Weight |
|
||
Supplied accessories |
Soft Case SS-DC1 |
- *1Figures are for fresh batteries; actual results may vary with performance and other factors even among batteries of identical ages and makes.
- *2Time between flash firing at full power and flash-ready light illuminating when flash is fired once every 30 s.
- *3Number of times flash can be fired at full power with flash-ready light illuminating within 30 s.
- *4Firmware can be updated from camera.