Multi-Format Film Scanner LS-4500AF

Reading system/Optics

Film type

4 x 5 in. film
40mm, 65mm, 75mm, and 120/220 formats, including 6 x 4.5, 6 x 6, 6 x 7, 6 x 9cm, up to panorama formats
35mm film (single frame, 6-frame strip, mounted film)
Transparency, positive or negative, color or monochrome

Reading resolution

5,000-pixel monochrome linear CCD x 2

A	1,000 dpi reading resolution
B	3,000 dpi reading resolution

Note: Dual optical system modes are indicated by [A] and [B] in this chart.

No. of pixels

A	Maximum 5,000 x 12,000 pixels
B	Maximum 5,000 x 18,000 pixels

Effective scanning area

A	5 in. (Main scan) x 6 in. (Sub-scan)
B	42mm (Main scan) x 6 in. (Sub-scan)

Light source

12V-20W halogen lamp

Color separation

RGB frame sequential

Film carrier

Three film carriers are available:

FH-45*	For sheet film (with 11 masks for different film sizes: 4 x 5 in., 6 x 9, 6 x 8, 6 x 7, 6 x 6, 6 x 4.5cm, 35mm, 6 x 6cm x 2 frames, 6 x 4.5cm x 2 frames, 35mm x 2 frames, 35mm x 4 frames)
FH-351N*	For 35mm mounted film (1 frame of 35mm film); with three attachments: for 4 frames of 35mm film, for 120/220 format sheet films and for 4 x 5 in. sheet films
FH-356	For 35mm strip film (12 frames of 35mm film)

Imaging optics

A	8 lenses in 4 groups
B	6 lenses in 4 groups

Autofocus

Contrast detection by CCD, focusing area selectable, manual focusing by software-controlled servo

Scanning/Signal processing

Image scanning

Three-pass RGB

Main scan	5,000-pixel monochrome linear CCD A: 5,000 pixels (hardware-interpolated to 10,000) B: 5,000 pixels
Sub-scanning	stepper-driven film stage A: 3 steps/line (2,000 dpi) B: 2 steps/line (3,000 dpi)

Scan time

A	Preview: Approx. 90 sec. (incl. pre-scan time) Final scan: Standard mode -- approx. 210 sec. Medium-speed mode -- approx. 180 sec. (@1,000 dpi, 4,500 x 3,600 pixels for approx. 46.3MB)
B	Preview: Approx. 60 sec. (incl. pre-scan time) Final scan: Standard mode -- approx. 200 sec. Medium-speed mode -- approx. 120 sec. (@3,000 dpi, 3,900 x 2,600 pixels for approx. 29MB)

Scanning spatial density

Pixel density

A	maximum 2,000 dpi interpolated from 1,000 dpi
B	maximum 3,000 dpi

Pixel size

A	12.7µm square
B	8.5µm square

A/D conversion

12 bits per color channel

Output data

8 bits per color channel

Data transfer

Panel indicators	POWER, BUSY and ERROR status indicated by LED
Scanning software	Photoshop ™ plug-in for Mac ® OS and TWAIN source for Windows ® . Nikon Scan application supports Photoshop ™ plug-in and TWAIN source on both Mac ® OS and Windows ® platforms
Interface	SCSI-II
Image transfer	Three-pass RGB frame sequential
Maximum transfer rate	1MB/sec. or better

Operating conditions

Power requirements	100 - 120VAC/200 - 240VAC; 0.8A/0.4A, 50/60Hz
Environmental	Temperature: 10°C - 35°C (50°F - 95°F) Relative Humidity: 30 - 85% (non-condensing)
Dimensions (W x D x H) and weight (approx.)	295 x 420 x 250mm; 13kg(11.6 x 16.5 x 9.8 in.; 28.7 lb.)

* FH-45 and FH-351N can be manually rotated for precise alignment.
All names of companies and products are trademarks or registered trademarks of their respective holders.
Specifications and equipment are subject to change without any notice or obligation on the part of the manufacturer.

WARNING : to ensure correct usage,read manuals carefully before using your equipment. some documentation is supplied on CD-ROM only.